Install Electric Switch at right place


Today, we will discuss how to Install Electric Switch at right place. As we are becoming more and more busy, we want to have our devices smart enough to help us out. As we run in rush of life, smart devices are the best friends. In case there was any doubt, we’re living in the golden age of technology development. In the past couple of decades, we’ve gone from relying on corded phones for the bulk of our communication to tiny computers in our pockets that are capable of dozens of simultaneous communication functions. This smart technology generally refers to any suite of devices, appliances, or systems that connect into a common network that can be independently and remotely controlled. When your home technology works together in one system. Therefore, we can call it as “connected home”.

Smart automation allows you to tap into high-tech functionality and luxury that wasn’t possible in the past. As technology development continues to expand, so will the possibilities for consumer home automation to make life easier and more enjoyable.

Install Electric Switch at right place

The only issue with smart technology is that we need to contol them electronically. So, devices need to be plugged in, have a proper electric connection or recharge their batteries. To enjoy life with such smart technology, we need to install electric switched at right place in our house/room/office etc. The electric switch should be easily accessible as and when needed. Like the appliances that can be used in bedtime, should have switch/ socket place near the bed. Study room/corner will also need a socket/switch point. For other appliances like smart TV, automatic lights, fan/ACs etc the switches need to be installed at the approachable points.

We should decide the switch plates that whether we only need a switch with socket or with Ph. point and how many switches and sockets do we actually need at different points. Hence, Hero Electric has manufactured different combinations of switch plates in various sizes. Therefore we can select from these sizes and no. of sockets/switches as per our requirement. Here, are the important links to help you Install Electric Switch at right place.

For more information:
Contact us via: or email us directly at: For product details, visit our webiste:

Why people like us?

Hero Electric, War of brands

The Trending World!! New Generation!! Brand Consciousness!!

The war of Class!!

The battle of Attitude!!

Nothing is more important than The Style. We are in a war!! The war of classiness, sophistication, inclination..

To survive in such environment, we need to move with class.

The most straightforward way to improve your life is to instantly tweak your style. Use very good accessories. All people are wanting for totally different brands to introduce elegant products. Magnificence is that the class. This class is maintained by several industries. We want the brands in our dresses, get up, vehicles and even in home interior decoration.

We all have some dreams after we build our home. We wish to visualize the proper reflection of our dream house in it. Our alternative suggestions becomes very tough once it involves interior decoration. Maintaining a beautiful interior is on our high list. Besides, furniture, floor and ceiling, we must always additionally pay special attention to the walls. Decorating the walls with nice paintings, soothing curtains with stunning wall paint. Now a days, as folks are getting a lot of and a lot of beauty awareness, having an outstanding space is additionally turning into essential. To create your space far more elegant Hero electric is giving its most gorgeous electrical products range.

Hero Electric has introduced various series like Golden Texture Series, Gray Texture Series, Floral whitefloral blackedge red, edge graynice seriesstylish seriesstylo seriesnice seriessmart seriesG series and piano series.

Socket Replacement

electric sockets in Pakistan by Hero Electric

What are Sockets?

Sockets are often surface or flush-mounted. It’s easier to surface-mount electrical fittings, however the flush-mounted versions look higher and ar less susceptible to accidental injury.

Before adding a socket to your electrical device, you need to make sure that it’ll be compliant with IEE electrical rules, and establish whether or not the circuit would require RCD protection.

Socket Replacement

Before you begin any style of trade, you need to follow these following safety precautions:

Switch off the most power at the patron unit/fuse box. Isolate the circuit you intend to figure on by removing the circuit fuse. place this in your pocket to avoid accidental replacement.
Or cut the breaker and lock it if you’ll be able to.
Attach a note to the unit to advise you’re functioning on the circuit.
Check the circuit is dead with a socket tester or voltage tester/meter for lighting circuits.

If one amongst your sockets has been scorched, it’s always been caused by overloading or loose connections in an exceedingly plug. do not plug your appliances back in while not addressing the matter 1st or it’ll happen once more.

Step 1

hero electric sockets

Start by analytic the circuit. Use a socket tester to control that it’s dead. Unscrew the socket protection and pull it off from the wall, however keep the screws just in case the new ones do not match.

Step 2

Loosen the terminal screws and free the cable cores. If the insulation has been heat broken, deflate the cores and strip the ends. Run green/yellow sleeving over the world core if it’s exposed. because the metal back boxes should be earthed, run a brief length of earth cable between the world terminals of the rear box and therefore the protection.

sockets in Pakistan

Step 3

Connect the live core or cores to the live terminal (L) of the new protection, the neutral to the neutral terminal (N) and therefore the earth to the world terminal (E or (Earth symbol)). absolutely tighten the terminal screws, and match the new protection. If the new screws do not match the lugs of the recent box, simply re-use the first screws. Finally, use the socket tester to visualize you’ve got wired everything properly.

electric products in Pakistan

What is short circuiting?

What is short circuiting

What is short circuiting?

A short circuiting is just a low resistance association between the 2 conductors supply wattage to any circuit. This ends up in excessive current flow within the power supply through the ‘short,’ and will even cause the ability supply to be destroyed. If a fuse is within the offer circuit, it’ll do its job and blow out, gap the circuit and stopping the present flow.

A short circuit is also in a very direct- or alternating-current (DC or AC) circuit. If it’s battery that’s shorted, the battery are going to be discharged terribly quickly and can heat up because of the high current flow.

Short circuits will manufacture terribly high temperatures because of the high power dissipation within the circuit. If a charged, high-voltage electrical condenser is brief circuited by a skinny wire, the ensuing large current and power dissipation can cause the wire to truly explode.

Arc attachment may be a common example of the sensible application of the heating because of a brief circuit. the ability offer for associate arc craftsman will offer terribly high currents that flow through the attachment rod and therefore the metal items being welded. the purpose of contact between the rod and therefore the metal surfaces gets heated to the freezing point, fusing an area of the rod and each surfaces into one piece.

For more information:
Contact us via: or email us directly at:

For product details, visit our webiste:

Electrical Mistakes Part IV

plugs background

Electrical Mistakes

Wiring issues and electrical mistakes area unit only too common, and if left uncorrected have the potential to cause short circuits, shocks and even fires. Here’s what to seem for and the way to mend what you discover.

Mistake: Overfilling Electrical Boxes
Mistake: Box too little

Too several wires stuffed into a box will cause dangerous heating, short-circuiting and fireplace. The National Electrical Code specifies minimum box sizes to scale back this risk.

Solution: Install a bigger box

To figure the minimum box size needed, add up the things within the box:

1 – for every hot wire and neutral wire coming into the box

1 – for all the bottom wires combined

1 – for all the cable clamps combined

2 – for every device (switch or outlet?but not light-weight fixtures)

Multiply the entire by a pair of.00 for 14-gauge wire and by a pair of.25 for 12-gauge wire to induce the minimum box size needed in blocky inches. Then select a box with a minimum of this a lot of volume. Plastic boxes have the quantity sealed within, typically on the rear. Steel box capacities area unit listed within the electrical code. Steel boxes will not be labeled , thus you’ll need to live the peak, dimension and depth of the inside. Then multiply to seek out the quantity.

Mistake: Reversing Hot and Neutral Wires
Solution: Determine the neutral terminal

Connecting the black hot wire to the neutral terminal of AN outlet creates the potential for a deadly shock. the difficulty is that you simply might not notice the error till somebody gets afraid, as a result of lights and most alternative plug-in devices can still work; they solely will not work safely.

Always connect the white wire to the neutral terminal of shops and lightweight fixtures. The neutral terminal is often marked. it has always known by a silver or pastel screw. Connect the recent wire to the opposite terminal. If there is a inexperienced or clean copper wire, that is the ground. Connect the bottom to the inexperienced grounding screw or to a ground wire or grounded box.

Electrical Mistakes Part III

Close up image of human hand holding cable

Electrical Mistakes

Wiring issues and electrical mistakes area unit only too common, and if left uncorrected have the potential to cause short circuits, shocks and even fires. Here’s what to seem for and the way to mend what you discover.

Mistake: Recessing Boxes Behind the Wall Surface/ Exposed fuel

Electrical boxes should be flush to the wall surface if the wall surface could be a fuel. Boxes recessed behind flamable materials like wood gift a hearth hazard as a result of the wood is left exposed to potential heat and sparks.

Solution: Add a box extension

The fix is solely to put in a metal or plastic box extension. If you utilize a metal box extension on a plastic box, connect the metal extension to the bottom wire within the box employing a grounding clip and a brief piece of wire.

Mistake: Putting in Cable while not a Clamp/ Missing clamp

Cable that is not secured will strain the connections. In metal boxes, the sharp edges will cut the insulation on the wires. Single plastic boxes don’t need internal cable clamps, however the cable should be pinned among eight in. of the box. Larger plastic boxes area unit needed to possess intrinsic cable clamps and therefore the cable should be pinned among twelve in. of the box. Cables should be connected to metal boxes with AN approved cable clamp.

Solution: Install a clamp

Make sure the protective covering on the cable is at bay beneath the clamp, which concerning 1/4 in. of protective covering is visible within the box. Some metal boxes have intrinsic cable clamps. If the box you are victimization does not embody clamps, purchase clamps one by one and install them once you add the cable to the box.

Mistake: Wiring a GFCI Backward
Solution: Connect power to the ‘line’ terminals

GFCI (ground fault circuit interrupter) shops defend you from a deadly shock by closing off the facility after they sense slight variations in current. they need 2 pairs of terminals. One pair, labeled ‘line,’ is for incoming power for the GFCI outlet itself. the opposite set is labeled ‘load’ and provides protection for downstream shops. you may lose the shock protection if you combine up the road and cargo connections.

Electrical Mistakes Part II

Electrical mistakes Solutions Hero Electric 2

Electrical Mistakes

Wiring issues and electrical mistakes area unit only too common, and if left uncorrected have the potential to cause short circuits, shocks and even fires. Here’s what to seem for and the way to mend what you discover.

Mistake: Loose outlet

Loose switches or retailers will look unhealthy, however worse however, they are dangerous. Loosely connected retailers will move around, inflicting the wires to loosen from the terminals. Loose wires will arc and overheat, making a possible hearth hazard.

Solution: Add rigid spacers

Fix loose retailers by shimming beneath the screws to form a decent association to the box. you’ll be able to obtain special spacers reception centers and hardware stores. different choices embrace tiny washers or a coil of wire wrapped round the screw.

Mistake: putting in a Three-Slot receptacle while not a Ground Wire

Solution: Install a two-slot outlet

If you have got two-slot retailers, it’s tempting to switch them with three-slot retailers therefore you’ll be able to connect three-prong plugs. however do not do that unless you are positive there is a ground obtainable. Use a tester to check if your outlet is grounded. A series of lights indicates whether or not the outlet is wired properly or what fault exists. These testers area unit promptly obtainable reception centers and hardware stores.

If you discover a three-slot outlet in associate degree ungrounded box, the simplest fix is to easily replace it with a two-slot outlet.

Electrical Mistakes Part I

Electrical mistakes Solutions Hero Electric

Electrical Mistakes

Wiring issues and electrical mistakes area unit only too common, and if left uncorrected have the potential to cause short circuits, shocks and even fires. Here’s what to seem for and the way to mend what you discover.

Mistake: No electrical box

Never connect wires outside of electrical boxes. Junction boxes defend the associations from accidental harm and contain sparks and warmth from a loose connection or short.

Solution: Add a box

Where connections are not contained in associate degree electrical box, install a box and reconnect the wires within it.

Mistake 2: Wires too short

Wires that area unit cut too short create wire connections tough and?since you are additional seemingly to create poor connections?dangerous. Leave the wires long enough to protrude a minimum of three in. from the box.

Solution: Extend wires

If you run into short wires, there is a straightforward fix. merely add 6-in. extensions onto the present wires.

Mistake: Unprotected cable

It’s easy to break plastic- podlike cable that is left exposed between framing members. that is why the electrical code needs cable to be protected in these areas. Cable is very vulnerable once it’s run over or beneath wall or ceiling framing

Solution: Install a a pair of x a pair of

Protect exposed plastic- podlike cable by nailing or sexual congress a 1-1/2-in.-thick board aboard the cable. you do not need to staple the cable to the board.